ElitePro 600 FLA002

Because of its high power, this flash head is especially suitable for group photography, commercial photography and for when specialist light shaping tools such as spotlights and honeycomb grids are used.
But good studio lights produce far more than just power. The power needs to be capable of fine control, and the flash head needs to accept a wide range of light shaping tools and modifiers, as well as to produce clean, consistent light quality at all power settings.

Another, very important factor is flash duration, because fast flash duration not only freezes movement but also produces very consistent colour temperature. The flash duration of the ElitePro 600 is a very impressive 1/1000th second (t-05), far faster than many similar Edit Product on the market! 

The flash tube is extremely unlikely to fail, but it's good to know that all Lencarta flashtubes are available at very reasonable prices and are user changeable.

Controls

• On/Off


• Stepless power adjustment over 5 stops


• Slave sensor on/off


• Modelling light on/off


• Modelling light can also be set to proportional power, matching the power setting of the flash


• Recharge ready beep on/off


• Modelling light on/off during recharging (lamp can be set to switch off as soon as the flash is fired. It then switches on again as soon as it is ready to fire again) The illuminated display also dims during recharging.


• Test/open flash button

The ElitePro 600 also has stepless adjustment over a 5-stop range, allowing a wide choice of aperture settings, it has extremely accurate power consistency and colour temperature consistency, full power recycling of less than 1.5 seconds  and it accepts all of the vast range of light shaping tools and modifiers produced in the very popular Bowens ‘S’ fitting.

Please note that theseflash heads are supplied WITHOUT a reflector. Please choose a reflector, if required, from our light shapers page. The standard reflector is the best choice for most people.

Each flash head also includes:
1 x protective head cap
1 x 250 watt modelling lamp
1 x mains lead (with UK plug)
1 x synch cable

SPECIFICATIONS (boxed)
Weight 3.9 kg
Length 466mm
Height 204mm
depth 198mm